Abra o teclado numérico e digite isso:*#197328640# e depois siga essa sequência

(5)audio
(3) spk config
(4) spl wave/mp3
(5) spk mp3
(1) spk mp3 slop gain
6.(14) 498 (0x1ff)
Onde vamos editar o item 6
Escolha o nº 6 ate aparecer (SPK MP3 Slop,WRITE)
Depois na barra coloque o valor 511 salve
Depois é só fazer o teste lembrando q eu teste aquii no meu Star e deu uma difença significante no som
E também se desligar o celular o volume volta ao normal tendo que refazer esse procedimento

Esse é o outro método (antigo) pra quem quiser usa-lo:
Tecle :*#6984125*# e depois (4) internals digite isso como senha: *#9072641*# confirme
Escolha a opção (3)modo prueba(em Espanhol) ou (3) Test Mode (em Ingles) depois siga essa sequência
(5)audio
(3) spk config
(4) spl wave/mp3
(5) spk mp3
(1) spk mp3 slop gain
6.(14) 498 (0x1ff)
Onde vamos editar o item 6
Escolha o nº 6 ate aparecer (SPK MP3 Slop,WRITE)
Depois na barra coloque o valor 511 salve

Agora configure os fones de ouvido

Abra o teclado numérico e digite isso:*#197328640# e depois siga essa sequência

(5) Audio
(2)EAR Config
(4) EAR WAVE/mp3
(5) EAR MP3
(1) EAR MP3 Slop Gain
Escolha o nº 6 ate aparecer, até aparecer EAR MP3 Slop, WRITE
Depois na barra coloque o valor 511 salve

Existe tambem essa forma de aumentar o volume(precisa de mais testes)

Abra o teclado numérico e digite isso:*#197328640# e depois siga essa sequência

5Common Config
2APVMXGAIN
5APVMXGAIN MP3
Agora escolham o o(zero) para mudar de READ para WRITE
Na barra coloquem o valor 12000 e salve

O pessoal mexeu de um lado e do outro e hoje já existem alguns modos de instalação de jogos no Samsung Corby, esse método abaixo é o mais fácil e foi testado e aprovado, confira:

O jogo deve ter 2 arquivos, um .jad e um .jar. Copie os dois arquivos para o cartão de memória do telefone.

IMPORTANTE: não coloque dentro de pastas, e nem crie pastas para os arquivos, eles devem estar na pasta raiz do cartão de memória.

Instalando no Corby:

Agora com os arquivos no cartão de memória do corby, essa é a parte em que muitos se confudem.

1° Vá em Menu > Wap > Inserir URL

1.1 – Selecione a opção “Salvar nos favoritos, isso vai te ajudar a não ter que escrever todo o endereço quando for instalar outro jogo:

1.2 – Delete o http://

1.3 – Digite file:///Mount/Mmc/nome do jogo.jar ou .jad

Explicação:

Seguindo o exemplo que demos anteriormente em que estamos instalando um arquivo .jad e que editamos o nome do mesmo para 01.jad .

O link ficaria assim: file:///Mount/Mmc/01.jad

2° Clique em ‘Ir’ e irá aparece uma página com os detalhes do arquivo.

2.1- Clique em ‘Salvar’

Samsung X600

#*7337#

Samsung D500

#*7337#

*2767*3855#

Samsung E700

*2767*688#

Samsung C100

#———————————#

enter: “*#9998*masterpwd#” <<< *#9998*627837793#

#———————————#

#————————#

enter: “*#9998*3323#”

select ‘Exit’ then 7th option

*the phone will reboot*

#————————#

Go to menu 4.2.4 (4=Phone Settings, 2=My Settings, 4=File Manager)

and choose 4 (initialise) è 6 (recover).

Samsung SGH-Q105

First of all, I want to say thanks to all the people who posted useful stuff here. I couldn’t have done it without you! Second of all a big **** YOU to all the stupid telco’s trying to LOCK the phones that we paid for!

How would you like to buy a car, and when you drive from the USA to Canada it stops working??? It wouldn’t fly now, would it??

So, here’s how I got the Q105 to unlock, following the various posts on this site, and mixing+matching codes:

1. Insert the SIM that your phone says is the “Wrong SIM” into the phone. A message saying “Wrong SIM Card” should appear on the screen. You can only make SOS calls at this point.

2. Enter in the phone *#9998*627837793# and wait until the error message (“Wrong Code”) dissapears

3. Enter in the phone *#9998*3323#

4. You will now see the option “Exit” on the bottom side of the phone. Hit the soft key above it to exit.

5. Press the “7″ key on the key pad. Your phone will now reboot. (Turn off & turn on automatically.)

6. After the phone turns back on it will be unlocked to the SIM card already in the phone (the one that was the “Wrong SIM”). This is just a temporary unlock.

7. To finish unlocking the phone do the following steps: Enter *0141# and

press the green CALL button as if you were calling the above number. A small box saying “Personalized” will now appear.

8. Turn off your phone take off the battery, insert a different SIM card (not the one called the “Wrong SIM”)

9. When you turn on the phone it will ask you for a “SIM unlock code”. Type in “00000000″ or 8 zeros.

10. Press OK and now your phone is unlocked to all networks.

Notes: my cell was locked in to T-mobile USA. The “Wrong SIM” card I used was from Europe. It worked like a charm! Good luck to ya!

Samsung X100

*2767*688#

SGH-A300 = *2767*637#

SGH-A400 = *2767*637#

SGH-A800 = *2767*637#

SGH-E400 = *2767*688# In newer phones: = #*7337#

SGH-E500 = *2767*688# In newer phones: = #*7337#

SGH-E700 = *2767*688# In newer phones: = #*7337#

SGH-E715

Turn off the phone. Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another SIM Card. Turn on. The code is 00000000.

In newer phones:

#*7337#”

Samsung R225

*2767*2878#

Samsung E700

*2767*688#

In newer phones:

#*7337#

Samsung C225

*2767*688(Your imei number)#

then do *0141# bit and voila, fone is all unlocked

(*0141# and SEND button say “personalized” and Ok)

I have just unlock my E700. Code *2767*688# are not working om firmware E70XBDC4, it works on firmware E70XBWJ7. I just oppgrade to E70XBWJ7 with Downloader 3.3 and enter Code *2767*688# after reboot.

—S100, S300, V200:

*2767*7822573738#

—A300, A800

*2767*637#

—X100

*2767*688#

c100 and x100

*2767*688#

#*7337# E700 E715 AND T200 T500 S105 S100 X100 X600

ENTER SIM

*#9998*3323#AND PRESS EXIT THEN PRESS No.7KEY PHONE WILL B RESTART

PHONE UNLOCKED?

CHANGE SIM ENTER CODE (00000000) EIGHT TIME ?

R210 R220

*2767*2878#

S500

*2767*688#

Just got my Samsung S307 and E715 tonight and had enough spare time to mess around and try to unlock it. Anyhow, this worked for my phone, and it seems like it should work for most Samsungs from what I’ve seen posted.

1. Turn off your phone, put in a SIM of a provider that it is not locked to, and turn it back on.

2. At the wrong card message, type *#9998*3323#. A message will pop up telling you to press exit, so hit the right softkey. Choose number 7 (or 8 or 9 work, I think). Your phone will reboot and your SIM will work.

3. Type *0141# and then hit call. This will give you a message saying your phone is personalized.

4. Power down your phone and insert a SIM card other than the one that is in it. Power back up your phone.

5. At the SIM code prompt type 00000000, that is 8 zeroes.

Your phone should now be unlocked. At least mine seems to be. Let me know how it goes. By the way, I stole all of this info from the threads below. I just kinda smashed it all togethe

x600 and x100 ,x100A,x600

A i tried with this *2767*3377# codes. it is working properaly

This works 100% SGH-X450, but has to be completed EXACTLY as it’s written:

1. Insert the wrong sim card into the phone, a message saying “wrong sim card” should appear on the screen. You can only make SOS calls at this point.

2. Enter in the phone *#9998*3323#

3. You will now see the option ‘Exit’ on the left side of the phone. Hit the left soft key to exit.

4. Press the “7” key on the key pad. Your phone will now reboot. (Turn off & turn on automatically.)

5. After the phone turns back on it will be unlocked to your sim card in the phone. To finish unlocking the phone do the following steps.

6. Enter *0141#

7. Then hit the call button as if you were calling the above number. A small box saying “Personalized” will now appear.

8. Turn off your phone take off the battery, insert a different sim card than the one that was previously in the phone.

9. When you turn on the phone it will ask you for a “SIM unlock code” this number is “00000000” or 8 zeros.

10. Press OK & now your phone is unlocked to all networks.

11.To change your WAP browser settings, enter *2767*927# this will reset your WAP browser, then enter *#87927# & edit one of your profiles.

V200

*2767*7822573738#

e700

*2767*688#

R220 Eprome Reset Only Dail *2767*2878#

E820

*2767*3855#

Trun off your set r220,

and trun on back with no sim card..

on sim card message press *2767*2878#

set disply reset message, will automaticaly truned off

now put sim card

trun on…

it will be unlocked

E700 #*7337#

N105

Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. You will get a new menu. Select Malloc Fail.

or #*7337# for new phones

SGH S500

*2767*MVT# (*2767*688#) E2P MVT Reset

*#SIMLOCK# (*#7465625#)

s300m

try these codes *#9998*3323# then pess on exit then that ll show u a new menu then hit the key 7.8.9. the problm ll be solved .